Custom Printed Hang Tags & Swing Tags

A handled brand component whose board, shape, attachment and finish are specified together with the pack it accompanies.

Textured die-cut hang tag attached to an ivory presentation box with a fine cord

At a glance

Minimum order quantity
From 1,000 pieces (offset and digital); digital printing for numbering and versions
Sampling
Presentation-quality sample in 5–7 working days. The sample cost is credited against your first approved production order.
Production lead time
15–20 working days after artwork approval; shorter for digital-only runs
Delivery terms
DDP or DAP to the EU and the UK, DDP to Switzerland and Japan; other countries, including the US and Australia: delivery terms set out on your quote. We do not publish duty or tax rates.
Production
Made to order (OEM/ODM)
Country of origin
Huai'an, Jiangsu, China
  • Die-Cut Tag

Overview

A hang tag is read and judged at close range. Board texture, edge quality, hole placement and the way the tag hangs all contribute as much as the printed artwork, especially when the piece sits directly against a garment, bottle neck or gift pack.

Producing the tag with its related box, carton or label keeps the colour decision in one approval process. The attachment is part of the specification rather than an afterthought: its type, colour, length and relationship to the die-cut shape are settled before the finished sample is approved.

A hang tag is a flat die-cut card, made from a single board or a duplexed one. The hole is punched through the card and can be strengthened with a card reinforcement or a metal eyelet; the cord, ribbon or elastic is fitted through it during finishing, at the length agreed on the sample, so the tags arrive strung. Both faces can be printed, so the brief should say which information belongs on the front and which on the reverse.

What to decide for this format

Shape, board and hole position

Develop the outline and hanging point together so the finished tag sits at the intended angle without crowding the artwork.

Attachment brief

Specify the required cord, ribbon or elastic appearance and how the tag will be attached to the product or pack.

Front, reverse and blank areas

Split the content between the two faces and leave a clear panel wherever a price, size or barcode sticker will be applied later.

Across the Hang Tags, Sleeves & Belly Bands range

This page covers what is particular to this product. The full lists for the whole range are set out once, on the Hang Tags, Sleeves & Belly Bands page:

All materials

All finishes

What applies to this product

Materials
Coated Board; Uncoated & Textured Papers; Kraft & Recycled Stocks; Duplexed Board; Cords, Ribbons & Eyelets
Printing & Finishes
Hot Foil Stamping; Embossing & Debossing; Edge Painting & Duplexing; Spot UV & Soft-Touch; Precision Die Cutting; Numbering & Variable Data
Applications
Apparel & Accessories; Spirits & Gifting
How it is made
Component & fit review; Die & material selection; Process selection; Sampling; Print, finish & die cut; Stringing, assembly & packing

Specifications

Minimum order quantityFrom 1,000 pieces (offset and digital); digital printing for numbering and versions
Production lead time15–20 working days after artwork approval; shorter for digital-only runs
Print processesOffset on the Rapida 106 and digital (installed 2022) for short runs, numbering and personalisation
AssemblyCord, ribbon and eyelets fitted in-house so components arrive ready to apply

Terms for this specification

Sampling
Presentation-quality sample in 5–7 working days. The sample cost is credited against your first approved production order.
Colour matching
Pantone references and physical samples are used where the selected print process supports them. The approval method follows the substrate, artwork and process.
Certifications
ISO 9001, ISO 14001:2015, ISO 45001 and China Environmental Labelling (Ten-Ring).
Materials and inks
FSC®-certified paper and board (FSC® C232946) on request, plus recycled-content stock, water-based inks and adhesives, and fibre-based fitments, where the selected construction supports them. Only products sold with an FSC claim on our invoice are FSC certified. FSC Chain of Custody certification means our forest supply chain is unbroken for our FSC-certified products. www.fsc.org How to order FSC-certified packaging

Design & artwork

We check print-ready files free. Ordering a sample? The dieline is included, drawn in-house to our presses. Design, or rebuilding AI images, is done by our partner studio and quoted per job.

See design services

Frequently asked questions

Can hang tags be colour-matched to a box or label?

They can be produced against the same colour reference and approved together. The stock still changes how a colour reads, so a textured or uncoated tag should be judged beside the coated pack rather than from screen values alone.

What attachment information should be included in the brief?

Describe how the tag attaches, the intended visual character and any required colour or length. Those details are then assessed with the die shape and actual product during sampling.

How do the hole position and string length change the way a tag hangs?

A tag hangs from its hole, so a hole centred at the top lets it hang straight, while a hole near a corner tips it to an angle. On a garment, a longer loop lets the tag fall clear of the seam or label it is attached beside, where it is easier to read; on a bottle neck, a shorter loop keeps it close to the glass, so it is less likely to slip down the shoulder or spin round. Both are tried on the actual product during sampling.

What artwork and sizes do you need to quote hang tags?

The tag outline, or a sketch with its size, and the artwork for both faces with any blank sticker panel marked, plus the board or texture you prefer and the quantity per version. If several sizes or colourways share one design, list them, because each version is a separate printed item. Say which country the tags are delivered to and, for the EU or the UK, whether you want DDP or DAP.

From the Journal

Related products

Request a custom packaging quote

What to send for a quote

  • The product it is for, and the format you have in mind
  • Size as length × width × height, and whether those are inside or outside dimensions
  • Quantity, or two or three quantities if you want to compare unit prices
  • Material and finish preferences, or the look you are after
  • Artwork status: print-ready files, a design without a dieline, or only a logo, ideas or AI images
  • The date you need the goods by
  • The destination country

Missing some of these? Send what you have, and we will ask about the rest.