Custom Magnetic Closure Gift Boxes
A hinged lid with concealed magnets that closes with a definite snap — the structure buyers most often mean when they say "premium gift box".
- Concealed Magnets
- Hinged Lid
- Fitted Inserts
- Foil & Emboss
- Collapsible Option
Overview
The magnetic closure box earns its place through one moment: the lid drops the last few millimetres by itself and closes with a click. That sound is why the format dominates premium gifting — it signals quality before the buyer has read a word of the packaging.
Mechanically it is a hinged-lid rigid box with magnets set into the front edge of the lid and the base wall, concealed beneath the wrap so nothing is visible from outside. Magnet strength is a specification decision: too weak and the lid drifts open in transit, too strong and the box is awkward to open one-handed. We set it against the weight of the lid and how the product will be handled at retail.
It is also the structure most often specified as collapsible — shipped flat and assembled without adhesive, which cuts freight volume significantly on export programmes while keeping the closure and the finish identical.
Variants
Standard Hinged Magnetic Box
The default: a one-piece hinged lid with two or four magnets, wrapped and rigid, shipped assembled.
Collapsible Magnetic Box
Ships flat and folds up without adhesive. Same closure and finish, materially less freight volume on export runs.
Magnetic Box with Ribbon Pull
A ribbon set into the lid edge, useful when the lid is heavy or the fit is deliberately tight.
Double-Door Magnetic Box
Two lids meeting at the centre, opening outwards. A theatrical reveal for sets and collections.
Magnetic Box with Fitted Insert
EVA foam, moulded card or satin-lined trays cut to the product so it sits still and presents square.
Selected work
Board & material options
Greyboard
The dense structural core of a rigid box.
Not printed — it is wrapped. Thickness is specified against the weight the box carries and the opening feel you want.
Coated One Side (C1S)
Coated on the printing face, uncoated on the reverse.
The default carton and wrap board. You are paying for coating only where the print goes, so it is the economical choice whenever the inside face is not seen.
Textured & Felt-Marked
Embossed linen, laid and felt surfaces.
Carries a tactile identity with no extra finishing pass. Print sits softer on texture — fine detail and photographic images lose bite, so it suits type and blind emboss better than imagery.
Leather Grain
An embossed hide pattern on paper.
Used on rigid box wraps where the brief asks for leather without the cost, the weight, or the sourcing questions.
Finishing options
Hot Foil Stamping
Metallic foil applied by heated die, registered to the print.
Gold, silver, copper and coloured foils. Applied flat before any wrapping or forming, so registration is controlled on a sheet rather than on a curve.
Embossing
Raised relief pressed into the surface from behind.
Can be registered over foil for a sculpted metallic mark. Sequence matters: emboss after foil is standard, and reversing it damages the foil surface.
Spot UV
Gloss varnish applied to selected artwork elements.
Highest contrast over a matte or soft-touch base. On a gloss laminate it barely reads — the base finish decides whether spot UV is worth paying for.
Soft-Touch Lamination
A velvet matte film laminated to the printed surface.
Changes how the pack feels more than how it looks, and hides fingerprints on dark artwork. The most requested finish on premium spirits and skincare.
What you can customise
- Internal dimensions built around your product
- Board thickness against weight and opening feel
- Wrap material, print and finishing combination
- Insert material, cavity layout and lining colour
- Ribbon, closure and hardware detail
- Export carton count and pallet configuration
Specifications
| Minimum order quantity | Typically 500–1,000 units for premium gift boxes with complex finishing |
|---|---|
| Production lead time | 15–20 working days after artwork approval; complex gift boxes 25–30 working days |
| Printing | Koenig & Bauer Rapida 106 eight-colour offset — CMYK and Pantone spot colours |
| Box forming | Two Hongming 6418K automated box lines, with hand wrapping and assembly for detail work |
Terms for this specification
- Sampling
- Presentation-quality sample in 5–7 working days. The sample cost is credited against your first approved production order.
- Colour matching
- Pantone references and physical samples are used where the selected print process supports them. The approval method follows the substrate, artwork and process.
- Certifications
- ISO 9001, ISO 14001:2015, ISO 45001 and China Environmental Labelling (Ten-Ring). ISO 22000 applies to eligible food-contact work.
- Sustainable options
- FSC-certified or recycled-content paper and board, water-based inks and adhesives, and fibre-based fitments are available where the selected construction supports them.
What drives the cost
We do not publish a price list, because no two specifications are alike. The levers that decide a quote are consistent, though.
Quantity
Most of the cost of a print job is set-up — plates, dies, make-ready, the first good sheet. Doubling a run rarely doubles the price, which is why it is worth asking for two or three volumes on the same quote.
Structure
A rigid box is formed, wrapped and often assembled by hand; a folding carton is die-cut and glued in one pass. Structure is usually the single biggest difference between two otherwise identical packs.
Material
Board grade and wrap stock. Specialty and textured papers cost more per sheet, but can replace a finishing pass — sometimes the cheaper route to the same effect.
Finishing passes
Each of foil, emboss, spot UV and lamination is a separate pass through a machine. Two effects cost roughly twice one, so the question is always which effect earns its place.
Tooling
Dies, emboss plates and foil blocks are one-off costs carried by the first order and reused on every repeat. Repeat runs of an approved specification are materially cheaper than the first.
Design & artwork
From an artwork check, through a dimensioned dieline and print-ready files, to a full concept package across a range — done by the factory that will make it.
Applications
Spirits & Wine
Single-bottle and gift-set boxes where the closure is part of the unboxing.
Beauty & Fragrance
Coffrets and launch kits opened and closed repeatedly at counter.
Electronics & Accessories
Product boxes where a fitted insert holds components in place.
Corporate Gifting
Onboarding and client gift boxes that recipients tend to keep and reuse.
Why Yuan Packaging
- Two Hongming 6418K automated box lines plus hand finishing on every structure
- Presentation-quality structural sample in 5–7 working days, credited against your first order
- Printing, foil, embossing and lamination applied in-house before wrapping
- Rigid boxes produced for Chinese spirits houses including Guoyuan and Yanghe distilleries
Frequently asked questions
How strong should the magnets be?
Strong enough that the lid stays shut in transit, light enough to open with one hand. We set it against lid weight and how the box is handled at retail, and it is one of the things worth checking on the physical sample rather than specifying on paper.
Can a magnetic box ship flat?
Yes — the collapsible version folds up without adhesive and gives the same closure and finish. It costs a little more per unit and usually saves considerably more than that in freight, so it is worth quoting both ways on an export programme.
Are the magnets visible?
No. They are set into the board and covered by the wrap, so the outside surface is unbroken. On very thin board a magnet can occasionally telegraph through a pale wrap — we check this at sampling and step up the board or the wrap if it shows.